Friendly Makita Railguard Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A holder for your Makita Railguard, where form follows function.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I build myself a pretty customized workbench where a 100cm railguard from Makita can be used for cutting. Now, with this holder I can stow away it in the back of my workbench and have a smile everytime I need it.
Print it laying on the side so that - that makes it pretty sturdy, no support needed. Mine worked out with PETG, 15% infill, took roughly 5:30 hours to print. Holes are for 2,5x20mm screws, so if you need bigger ones, you may need to adapt it in a CAD software of your choice.
As always have fun printing it and hope it will do serve you well.