1 / 1
Mesh for silica box  - marsgizmo-drybox-filament-bunker-v3 — zdjęcie 1

Mesh for silica box - marsgizmo-drybox-filament-bunker-v3

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Need to fill the silica box hole in the filament bunker and don't have any Lexan laying around?

Ocena
0 / 5
Polubienia
1
Pobrania
35
Wydruki
0
Wyświetlenia
271
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I printed this (marsgizmo-drybox-filament-bunker-v3) filament bunker and then quickly realized that there's a gaping hole in the silica box ><

After watching the video, it was obvious that I missed the whole blip about putting some clear material in there.

SO, since I didn't have any clear material laying around I figured I would just make this quick and dirty little filler. 

hopefully this will save you having to do the same!

Cheers

Tagi