MaxKare Exercise Bike Screen Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A screen mount piece for MaxKare brand magnetic indoor exercise bike.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Public Domain
I copied the dimensions of the original injection molded part, but changed the design to a tie mount instead of a screw mount which cracked frequently even with the OEM molded replacements. I made some flexible TPU re-usable cable ties to secure the screen mount from https://www.printables.com/model/124743-tpu-flex-cable-zip-tie. These held the screen in place very well while exercising.
This can print on it's side without supports from Bambu Studio just fine. You might need to print with supports if bridging is not supported in your slicer.
Printed using 0.2 mm layer height, 5 wall layers, 50% infill.