1 / 9
Manche et capuchon pour lame Stanley 0 11 221 — zdjęcie 1
1 / 9

Manche et capuchon pour lame Stanley 0 11 221

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Manche compacte pour lame Stanley ref. 0 11 221

Ocena
0 / 5
Polubienia
3
Pobrania
8
Wydruki
0
Wyświetlenia
65
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

FR

Manche compacte qui sera utilisé dans une création à venir

Notice

1 posez la lame dans la partie creuse du manche.

2 Clipsez la lame dans la partie creuse en appuyant fortement avec un tournevis

3 Clipsez la seconde partie du manche et vérifier quelle jointe parfaitement.

4 Enlevez la seconde partie du manche, encollez la lame et remettez la seconde partie du manche en place et maintenez-la en pression le temps du séchage.

Colle recommandé cyanoacrylate 

Pas de supports

les deux parties du manche sont à imprimer plein

Le capuchon avec 2  périmètres, dessus et dessous

Respectez le sens des .stl

Bon print

 

EN

Compact handle to be used in a future creation

Instructions

1 Place the blade in the hollow part of the handle.

2 Clip the blade into the hollow part, pressing firmly with a screwdriver.

3 Clip on the second part of the handle and check that it fits perfectly.

4 Remove the second part of the handle, glue the blade and put the second part of the handle back in place, keeping it pressed down while it dries.

Recommended cyanoacrylate glue

No supports

both parts of the handle are to be printed solid

The cap with 2 perimeters, top and bottom

Respect the direction of the .stl

Good print

Translated with DeepL.com (free version)

Tagi