door catch (FreeCAD customizable)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Anchor to the wall behind door to keep it open.When there's stuff that's pushing the door back closed or the doorframe…
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 28
- Wydruki
- 1
- Wyświetlenia
- 140
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
Anchor to the wall behind door to keep it open.
When there's stuff that's pushing the door back closed or the doorframe is leaning inward doors tend to become very annoying especially when you have to shuffle through it a lot. Use this door catch to secure it in place.
I printed this in 98A TPU which is quite a bit sturdier than regular flexible TPU but won't snap under tension like PLA. PETG is also an option. 0.3 mm layer height, 3 to 4 walls, 15% to 25% zig-zag infill, and a minimum of 4 top and bottom layers.
Category: Household