1 / 5
Trichter für Ölsprühflasche/ Funnel for oil spray bottle — zdjęcie 1
1 / 5

Trichter für Ölsprühflasche/ Funnel for oil spray bottle

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Trichter mit Entlüftung/ Funnel with vent

Ocena
0 / 5
Polubienia
3
Pobrania
33
Wydruki
0
Wyświetlenia
103
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Dies ist ein Trichter mit Entlüftung zum Befüllen unserer Ölsprühflasche, mit einem Innendurchmesser von 11,5 m

Die Hauptabmessungen sind (siehe auch Zeichnung):
Einfüllöffnung Trichterdurchmesser 40 mm
Auslass Außendurchmesser 10 mm
Auslass Innendurchmesser 7 mm

Es wird empfohlen, den Trichter aus PETG (Lebensmittelkontakt) zu drucken und nach Gebrauch von Hand mit Spülmittel zu reinigen.

Es ist kein Support nötig, wenn der Trichter auf dem Kopf gedruckt wird.

 

 

Translation: DeepL

This is a funnel with vent for filling our oil spray bottle, with an inner diameter of 11.5 mm.

The main dimensions are (see also drawing):
Filling opening funnel diameter 40 mm
Outlet outer diameter 10 mm
Outlet inner diameter 7 mm

It is recommended that the funnel is printed in PETG (food contact) and cleaned by hand with washing-up liquid after use.

No support is required if the funnel is printed upside down.

Tagi