1 / 2
Ground Anchor Screws (For Ecovacs Goat G1 Station) — zdjęcie 1
1 / 2

Ground Anchor Screws (For Ecovacs Goat G1 Station)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement ground anchors suitable for the Ecovacs Goat G1 robot mower station.

Ocena
0 / 5
Polubienia
13
Pobrania
193
Wydruki
0
Wyświetlenia
599
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I created these screws as a replacement for the original ground anchors of the Ecovacs Goat G1 robot lawnmower.

I printed the model you can see in the pictures on a Prusa MK3S+ in ASA without any issues. 

No need for support.

Make sure that your filament is dry since this will have a significant impact on the strength of the screws.

Moreover, I would recommend to use a brim when in doubt about the bed adhesion.

I also included the Fusion and STEP files in case you want to remix the design or adapt the measurements.

If you have questions, remarks, suggestions, I would be happy to hear from you.

Tagi