Creality K1, K1 Max, K1C cable strain relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple and effective mod to keep the cable and bowden tube securely in place on Creality K1, K1 Max, and K1C printers
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 204
- Wydruki
- 2
- Wyświetlenia
- 2551
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Creality K1, K1 Max, K1C Cable Strain Relief Mod
If you've removed the drag chain on your Creality K1, K1 Max, or K1C, you may have noticed that the bowden tube can sometimes fall down and get caught on the build plate. This can cause frustrating jams and disruptions to your printing workflow. This mod provides a simple and effective solution to keep your cables and bowden tube organized and out of the way.
What does this mod do?
This cable strain relief mod keeps the cable and bowden tube securely in place, even without the drag chain. By installing this mod, you'll ensure that your bowden tube stays upwards and out of the way, preventing it from getting caught on the build plate and causing filament jams.
Extra parts
- 1 x M3x8 SHCS (Socket Head Cap Screw)
- 3 x 2.5mm Cable Ties
To ensure the best results, please use the following printing configuration:
- Material: ABS, ASA, or at least PETG
- Perimeters: 4
- Infill: 30%
- Support: No (this mod is designed to be printed without support)