Gridfinity Nippers Pliers Strippers Rack 2x2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Space and material efficient rack for small pliers/nippers.
- Ocena
- 5 / 5
- Polubienia
- 741
- Pobrania
- 2645
- Wydruki
- 30
- Wyświetlenia
- 8768
- Oceny
- 27
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Simple, space efficient storage solution for small pliers/nippers/cutters/strippers used in electronics.
Two standard bins in the files, one fits up to 6 pliers with a grip thickness of up to 11.5mm (the right one in the photos) and another for up to 5 pliers with a grip thickness of up to 14.5mm (not pictured).
The third is a custom-ish one I made to fit my selection of pliers, it has 1x 14.5mm slot, 3x 13.5mm slots and one 17.5mm slot.
Easy enough to modify one to your needs, if the two standard bins don't work for you, the original Fusion files are included.
Printing tip: Once the bridge connecting two dividers starts forming, slow the printer down, the dividers do flex a fair amount before the bridge is completed.
About 80mm/s worked for me, technically, but YMMV. I got better results, a smoother print in the bridge area, at about 50mm/s.