Hercules Battery Holder, 12V
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a wall-mountable battery holder for Hercules (Harbor Freight) 12V batteries.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 243
- Wydruki
- 0
- Wyświetlenia
- 739
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I didn't see any models for the 12V Hercules rechargable batteries, so I designed this one. I modeled it in Solidworks. I printed it with a .4mm nozzle, .2mm layer height. 4 top and bottom layers, and 4 wall loops. Gyroid infill at 15%. I printed it lying on its back using tree supports for the overhang. You might be able to print it without supports by standing it on edge, but I didn't try that.
This holder utilizes the spring catch on the battery, so it'll work vertically, horizontally, etc. I printed mine on a Sovol SV08 using Kingroon PLA, because my shop is air conditioned. But if you were going to put this into a toolbox that lived on the back of a truck, for example, you might use ASA or ABS for heat resistance.