Dust Cap for M26 Nitrox/Oxygen DIN Scuba Regulators
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Dust Cap for M26 Nitrox/Oxygen DIN Scuba Regulators
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 352
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is just a variation of my "Dust Cap for DIN Scuba Regulators", but for regulators with a M26x2 thread for use with gasses with an oxygen content above 21% within the EU.
Read this before you print or use it:
I do not own such a regulator. Which means i have no means of testing if it actually fits. The fact that M26x2 is a non-standard thread and is not listed in most metric thread tables doesn't exactly make it easier.
If you own such a reg and want to try it i'd really appreciate you telling me if it actually fits. Thanks!
I recommend PETG or ASA with 3 walls, 5 top and bottom layers and 15% of Gyroid infill.