Nut drivers for guitars and guitar effects
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Nut drivers for input jacks and potentiometers. Plastic so you don't scratch your guitar.
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 216
- Wydruki
- 0
- Wyświetlenia
- 575
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a set of printable nut drivers for nut sizes that are common when working with guitars and guitar effects. This includes: 7, 8, 10, 11, 12, 14, and 15mm, as well as 1/2, 3/8, and 7/16 inch. Because they are plastic, it minimizes the chances of you scratching the finish on a guitar or effects pedal.
I saw people in video using an injection-modeled version of something similar, but I didn't see any 3D models for them, so I decided to make one.
I printed these in ABS and tested a few sizes for fitment. If you need additional sizes or want to adjust the fit (tolerance), see the instructions below.
As always, Fusion 360 source is provided. It was somewhat challenging to create a model with a parameterized size that didn't run across bugs in Fusion 360. I have mostly done so, but I find if you adjust the size parameter from a very small value to a large value, Fusion will still have issues.
The two parameters that may be of interest:
- tolerance - Make this larger if you have a sloppy printer that can't print accurately.
- socket_size - Set to the size of the driver in mm. Note that you will have to manually adjust the text on the underside of the driver (I have a script that does this and exports all 10 sizes).