Cloudray K K4060 Series Laser Head Mount for K40 - MGN9H Linear Rail Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple mount for Cloudray K series Laser head to a k40 with a MGN9H Linear Rail.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 318
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Simple mount for Cloudray K series Laser head to a k40 with a MGN9H Linear Rail. Done as somewhat of a mashup of upgrades between the new head and this linear rail upgrade (of which the spacer is stolen from): https://www.thingiverse.com/thing:4853299
You need to print 3 spacers, one for each original post.
PLA at 15% infill worked fine for me, but you need to be wary of binding the linear rail when mounting it on the original carriage of the k40. Make sure to check that the whole carriage + linear rail can move freely when everything is screwed together, if it's not, then the screws are too tight.