1 / 3
Crosman 13xx Carbine Forestock - Mk.2
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easier Pumping and Stable Aim for Your Carbine
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 599
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (12)Powiązane
Trying to balance utility and width, this improved furniture is designed to clear its full sweep even with one of my standard or extended suppressors attached.
Though most factory units are attached with roll pins, this model has recesses for screws (#6-32x¾). The extended nose is meant to bracket the pivot pin and discourage its migration out of place.
1.8mm walls and 15% subcubic infill is adequate for the solid piece; 65% fill recommended for the hex pattern. The only supports needed may be a thin rib down the trough.