Gridfinity resistor storage bin (gridfinity pin compatible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small 2x2 storage bins for resistors or similar. Gridfinity with pin compatible
- Ocena
- 0 / 5
- Polubienia
- 27
- Pobrania
- 139
- Wydruki
- 0
- Wyświetlenia
- 1283
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Gridfinity organizers for resistors or other small parts.
One bin is about 15 mm wide and 64–80 mm Long (range due to label tab).
There is a higher and lower version depending on how much you want to store.
This is a remix and is 100% compatible with normal gridfinity but I have replaced the base from the original to remove the magnet fixing base and converted it for gridfinity with pin by adding the base from that as that system requires no magnets. This gives you more flexibility and when clicked into a base this is very solid.
If you want to use this option the gridfinity with pin bases are here:
https://makerworld.com/en/models/440624#profileId-346300