Strong printed 7" drone H-frame ( SpeedyBee ready ;-)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
H-frame with 190mm motor axis distance
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 387
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- GNU General Public License v3.0
You know, many printed frames break in collisions.
This is because they are made to look like factory frames,
which doesn't work with 3D printed parts.
So I made the H-frame simple to understand and print.
It weighs from 50 grams at 20% filling to 88 grams at 80%,
it is twice as light as carbon!
Parameters:
Symmetrical motor axis distance: 190mm
Motor installation hole spacing: diagonal 16mm & 19mm
Also, its ready 4 install SpeedyBee f405 v3 - 30mm mount ;-)
You just need 3D-printer with 200x200 print field, PET/PETg/coPET filament,
four 3x16mm screws with nuts 4 frame mount and 16 3x10mm screws 4 motor mount.
You don't need any settings in the flight controller - everything is the same as in X-frame.
Print, build and enjoy the flight!