Bifold Door Bottom Plate 3.5mm
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement bottom plate for bifold doors with square bottom bolt
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 76
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
Product Need
The bottom plate was missing from my bifold door, which caused the door to release from the track at the top.
Solution
Using the intact plate on another door, I modeled a replacement plate with accurate thickness and inset dimensions for the door bolt and floor mount.
Outcome
The final design fit all the dimensions of the bottom plate. The plate was too thick as modeled as my floor is uneven (which is probably why the original plate was omitted) so I designed a thiner design that can be found here: https://www.printables.com/model/995639-bifold-door-bottom-plate-15mm-thick
Print Settings
- Layer Height/Quality: 020" Speed
- Material: PETG (did not test additional materials, but all should work)
- Infill: 25% Gyroid (any infill pattern should work)
- Top/Bottom Layers: 5
- Perimeters: 3
Printer: Prusa MK4