Tarmo5 cable management and electronic holder using ESC 10BL120A/60A
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
No gluing or cable-strips necessary. This adapter holds ESC, its switch, receiver and capacitor in one module
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 332
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't like cable-ties. This mods uses the 4 existing holes on top of the Tarmo5 main-frame to fix this cable-management adapter. You click the Electronic Speed Controller and it snaps, hold it tight. Same for switch (a bit harder to click), receiver and capacitor.
It is important to print this angled, otherwise the clicks will result in breaks due to forces perpendicular to slicing direction. Have a look into the pictures above. Worked fine for me.
Optional: I added 2 more holes to have 6 in total, using the “simple adapter” to have more space to handle M4-inserts from rutex. They need a depth of 8,1mm (short version of rutex needs only 4 mm but I do not have them) and the “simple adapter” just adds the space. The ruthex insert is exactly in the middle. M4x8 screws are used for fixation.