Hadley JWST Spider - slotted 10-24 nut inserts remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This spider remix allows nuts to be inserted into slots once the print is finished, instead of pausing partway through.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 129
- Wydruki
- 2
- Wyświetlenia
- 344
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I didn't want captured nuts as it requires pausing the print partway through. I plan to make several of these so it helps to save time during the printing process.
Other spiders with slots exist, but only for the metric remixes. This one is for the 10-24 imperial nuts. I might make more models for the other spider designs later.
Some printers may struggle with the overhang. PETG will almost certainly string too much. With PLA only a little bit of pliers action was necessary to remove a single string or too (at least when printed on a MK4S).
Printed in PLA
0.4 nozzle
0.28 layer height (anything under 0.2 should be fine too)
30% infill, 4 perimeters as per Hadley's instruction manual