Rook 2020 MK1/MK2 Power Supply Mount for the Mornsun LM200
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a power supply mount for the Mornsun LM200 that used to come in the Rook Fabreeko kit. **READ DESCRIPTION**
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 363
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this but soon after I finished the design I decided to switch to a laptop power supply so it is not tested. If anyone wants me to make it a little slimmer on the one side so it can be mounted on the back with the wires facing down just ask.
IMPORTANT: If you are using blind joints on your Rook 2020 then you have to use the shorter version if you are mounting it vertical. If you are using the corner bracket then you are fine and can use the longer one for horizontal and vertical mounting.