Dingwall Bass Pickup Blank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replica of the stock dingwall bass pickup, to use to fill the extra route in your bass when the pickguard is removed.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
My Dingwall bass is routed for three pickups, but only came with two. I wanted to remove the pickup for aesthetics so I modelled the pickup. It is tall enough that you do not need to put foam underneath. However, if you want to be able to adjust the height, just remove thickness from the bottom in your slicer.
The screws used in mounting are M3x0.5, 30mm long.
I believe all current Dingwalls use the same size pickups, but I have only tested in on my 5 string Combustion, so measure first!