FlashForge Adventure 5M LED Mounts - Magnets, Side Mount, 8mm COB LED Strip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FlashForge Adventure 5M LED Mounts - Magnets, Side Mount, 8mm COB LED Strip
- Ocena
- 0 / 5
- Polubienia
- 105
- Pobrania
- 494
- Wydruki
- 2
- Wyświetlenia
- 3340
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- GNU General Public License v3.0
Uses cheap 24V COB LED strip (8mm). Connects to rear motherboard using existing LED header.
To make:
0.2mm, no supports (you'll need decent bridging), ‘outer face’ down on printbed.
Superglue in magnets, slide in LED
I was able to print 2x mounts for each side of the printer, with a continuous run of LED strip from the back right, to the front and across to the left, then back to the back left. the front run of the strip needs to be stuck straight to the frame as using a printed frame would interfere with the print head. I just peeled the back off and used the included adhesive (see picture - blue line is just stuck on, red is in printed mount). Tuck the LED strip behind the corners.
Modify the STEP file if you have different size magnets.