FTC Driver Station Case + Controller Holder - FTC #20625
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you use this, pls credit me (from ftc team #20625). To be clear, the ORIGINAL CASE isn't mine so look in the desc.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 366
- Wydruki
- 0
- Wyświetlenia
- 1549
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Uses m4 screws and nuts for attaching the controller holder together
For the holders:
Most settings are fine, and most materials are fine, I printed it with basic PLA
You will need supports for the screw holes since they are at a slight angle
For the case and clip-ins:
Please print out of TPU of at least 95a or lower
2 walls, 15% infill, 3 top/bottom layers, gyroid work best based on testing
Case from: https://www.printables.com/@randomestuff_2412475
CLICK HERE FOR THE ORIGINAL CASE DESIGN
The switch pro controller is on there bc I don't own a ps4/ps5/xbox controller and I'm too lazy to take a pic of it with the team's controllers. It isn't a legal gamepad for ftc rn lol.