Self Aligning 100mm Vesa Quick Release
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Self Aligning 100mm Vesa Quick Release
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 518
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
I have an ultrawide 34" Monitor, The stand would have taken up half the desk, So I made a stand. This adaptor is designed to free up my space and make it easy to connect or disconnect the monitor from the stand. (Designed and worked beautifully on the first print.) I used PETG, and printed them vertically together. Look carefully at the design, the most material touching the base. So one is opposite to the other… In the way of the stand, The vesa support is hinged with a screw that adjusts the angle of the monitor, the thread on the left and right are for Lights, The magnetic dome in the middle is for a Web cam… (Set up for my son, a youtuber) - Adjusted to suit M4 Screws