1 / 4
Single/double shower shelf for 25mm rails V22
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shower shelf
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Sept. 04, 2024 V22:
- First release
I designed this after I bought foam dispensers to save shampoo and shower gel and wanted to fix them so they wouldn't get too wet.
It can be used as a single or double element and also for other items.
Admittedly, two screws would probably have been enough. However, as the dispensers weigh approx. 700g each and the shelf should be stable and not slip, I used 4 screws.
Single element:
- 1x shelf
- 1x cover
- 1x back
- 4x 20mm M4 screws
Double element:
- 2x shelf
- 1x cover
- 4x 20mm M4 screws
Printing:
- Material: PETG
- Infill: 15% Gyroid
- Walls: 2
Assembly:
- Pay attention to the direction (flat sides down)
- The cover is used to conceal the front screws
- First insert the two front screws and attach the cover
- Then screw the front screws into the counterpart and tighten them
- Then tighten the rear screws until the shelf is firmly in place
- An allen key with a ball head makes screwing much easier
