Nucleum: Power Plant Cooling Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This cooling tower replaces the power plant standee in the board game Nucleum. The cooling tower has an slot in the…
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 444
- Wydruki
- 7
- Wyświetlenia
- 1806
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This cooling tower replaces the power plant standee in the board game Nucleum. The cooling tower has an slot in the top for placing a nucleum token when the power plant is activated.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
No
Supports:
No
0.4 mm Nozzle; 0.1 mm Layer Height
Infill:
20%
Notes:
Two filament swaps were done while printing. The main body of the cooling tower was printed using Cement Gray.
The cooling tower was designed in Fusion 360 and exported as an .STL file to MeshMixer. To get the proper curvature for the tower, I cut the .STL file for Charles_Lambert's Cooling Tower Pen Holder (Printables) in half with MeshMixer, imported the mesh into Fusion 360, and adapted the cross section into a sketch.
Category: Games