Orange Pi Zero 3 case + 30mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A case for the Orange Pi Zero 3 with a 30mm fan
- Ocena
- 5 / 5
- Polubienia
- 34
- Pobrania
- 345
- Wydruki
- 1
- Wyświetlenia
- 1496
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a modified version of TheParanoidEngineer's Orange Pi Zero 3 case. This version is taller and incorporates a 30mm fan, with space for heat sinks. This is derived from the Standard Hex version with external antenna and access to GPIO and USB. Only the top has been modified; you can use whichever version of the base you want. I've included the standard version of the base for your convenience, or the rest can be downloaded from the original model's page.
I included the .f3d files in case you wish to further modify the design. I feel obligated to include a warning that they are a total mess.
Required Hardware:
- 4x - 30mm M3 Screws- your choice of either pan head or countersink, I've included model files for both
- 4x - M3 Nuts
- 1x 30mm fan - I used this one, which uses M2.5 screws spaced 23.8mm apart
- (Optional) Heat sinks for the ICs. I used these ones.
Print settings:
- Layer Height: 0.25mm
- Infill: ≥50% (recommended)
- Supports: I recommend supports only for the nut recess holes. The top piece should not require any supports.