1 / 7
Akkuholder for E-bike with Parkside-Akku
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
a cool and cheap option for an e-bike battery
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 594
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (11)Powiązane
You only need two 18V Parkside batteries to build an e-bike battery. Just connect the two batteries in series to get 36V. I also used an aluminum plate for mounting. The middle casing is there to conceal the cables. Additionally, I always used heat-set inserts to avoid screwing directly into the plastic. However, you will need to drill some holes yourself. I hope this helps!