PVC Pipe Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount Brackets hold 1/2" PVC Piping to hold rolls of material for dispensing or storage
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable wall mount brackets, to use ½" PVC piping to store rolled materials.
I used this with a roll of white paper to use as a background for taking pictures of models in my garage. Could use for storing christmas paper over a wrapping station. Or plastic sheating, anything on a long roll.
Design has holes for both countersunk wood screws if you're mounting into a stud. And for pan head screws if you are using anchors (fits #4 and #6 in the US). Designed for no supports.
Printed in PETG. Print with large face down. No supports were needed on MK4. 30 solid bottom layers, to get maximum strength from the area held with the screws. 4 perimeters. Adaptive cubic fill. Combining infill layers for a bit faster printing.