1 / 8
Wallace, 6" f/2.8 telescope
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My printed 6" (155mm physical diameter) f/2.8 telescope's models. Printed on a bambu P1S in ASA.
- Ocena
- 0 / 5
- Polubienia
- 28
- Pobrania
- 63
- Wydruki
- 0
- Wyświetlenia
- 1094
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (17)Wydruki i komentarze (Wydruki: 0) (Komentarze: 3)Remiksy (0)Kolekcje (28)Powiązane
Want a practical, ready-to-print 150mm f/5 telescope because you cannot find a f/2.8 mirror ? Check out this project instead, that uses commonly available parts and is thought for ease of use : https://www.printables.com/model/1325533-smallest-telescope-kit-for-150750
BOM :
- 1x primary mirror, 155mm physical diameter, 430mm focal length
- 1x GSO 4 element coma corrector
- 1x 360mm vixen-like dovetail
- 1x 54mm secondary mirror
- 6x 5mm * 500mm carbon rod (cut to length)
- 3x 1mm thick, at least 7.5mm large, aluminum plates (focuser plates)
- 4x M4 * 16mm screw (focuser bearings)
- 4x 623ZZ bearing (focuser bearings)
- 4x M4 * 30 screw (focuser mounting)
- 3x M3 * 16 screw (corrector mounting hub)
- 2x M5 nylon pressure screw
- 1x 3mm smooth rod (focuser pinion)
- 3x 2mm steel nail (mirror cell lever axis)
- 4x M4 * 45 screw (mirror cell collimation, secondary hub)
- 6x M4 washer (mirror cell collimation)
- 3x heavy duty spring (mirror cell collimation)
- 1x lighter spring (secondary mirror collimation)
- 1x M4 nut (secondary mirror collimation)
- 3x M3 * 50mm screw (secondary mirror collimation)
- 10mm x 1mm thick carbon flat (spider vanes)
- Cyanoacrylate glue
- 16 M3x12 screws (backplate mounting)