1 / 4
Hand Terminal Prop from The Expanse — zdjęcie 1
1 / 4

Hand Terminal Prop from The Expanse

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A replica of the prop hand terminal used in The Expanse series.

Ocena
0 / 5
Polubienia
13
Pobrania
32
Wydruki
0
Wyświetlenia
260
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Props
Licencja
Creative Commons — Attribution — Noncommercial

I created this after seeing a few other attempts that didn't quite do it for me. This is meant to be a simple design. 

Parts:

Print one of each of the included .stl files. There should be a base, back, front and electronics piece. I print them in PLA except for the base. I use TPU with a 50% infill and supports with the piece aligned vertically.

Acrylic, or similar material, for the “screen”. Cut to fit the width of the base piece. 74mm x 112mm

2 LED's (Red for Mars, Yellow for Belters, and Blue for Earth/UN)

1 CR2032 coin cell battery

I also included an image that I created with the idea of getting it printed on acetate. They did this in the show for devices in the background. 

I have a playlist of videos if you need help assembling.

https://www.youtube.com/playlist?list=PL9PAT9oZoW9sp-nqb236L6h2yHZ6fCRsI

Tagi