1 / 3
Air Quality Monitor Enclosure — zdjęcie 1
1 / 3

Air Quality Monitor Enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple case for a home air/weather monitor, with mounting points for components.

Ocena
5 / 5
Polubienia
25
Pobrania
106
Wydruki
1
Wyświetlenia
1005
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution

A simple case for a home air/weather monitor, with mounting points for:

  • ESP8266 (Lolin NodeMCU V3)
  • SCD40 CO2 sensor
  • ENS160 + AHT2X VOCs sensor
  • BME280 Air Pressure sensor
  • USB C push-fit connector

(I'm aware there's some overlap in what those things sense; they're just what I had around and I'm trying to use the function each one is best at).

Mounting holes and case assembly holes are sized for M2 bolts, no threaded inserts needed. The specific SCD40 board I used is a push fit, since it doesn't have mounting holes.

 

ESPHome Config looks something like this:

i2c:
    sda: GPIO4
    scl: GPIO0
    scan: True

sensor:

  • platform: bme280_i2c temperature: name: "Temperature (BME)" id: bme_temperature pressure: name: "Pressure (BME)" id: bme_pressure humidity: name: "Humidity (BME)" id: bme_humidity address: 0x76

  • platform: scd4x co2: name: "CO2 (SCD)" temperature: name: "Temperature (SCD)" id: scd_temperature humidity: name: "Humidity (SCD)" id: scd_humidity ambient_pressure_compensation_source: bme_pressure

  • platform: ens160_i2c eco2: name: "CO2 Estimate" tvoc: name: "Total Volatile Organic Compounds" aqi: name: "Air Quality Index" address: 0x53 compensation: temperature: scd_temperature humidity: scd_humidity

Tagi