AirPods Pro Charging Stand - Shell Version
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Charging stand for AirPods Pro - cable not included. Not much else to say! Cable dimensions are precisely measured to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Charging stand for AirPods Pro - cable not included.
Not much else to say!
Cable dimensions are precisely measured to ensure your cable stays in place at all times. Approx dimensions for the stand (without AirPods) are 50mm x 45mm x 45mm
Can be a difficult print - see Print Settings for what has worked best for me.
I hope you enjoy my design, let me know if you have any suggestions for improvement.
Print Settings
Printer Brand:
Bambu Lab
Printer:
A1 Mini
**Rafts:**
No
Supports:
Yes
**Resolution:**
0.08
Infill:
15%
**Filament:** Bambu PLA Matte White
Notes:
I had the most success when printing left (or right) side down. The support should be easy to remove from the middle and might need a bit of a push through the lightning port (but mine still came out great).
Precision printing
Not sure if it's because of the orientation but I saw more variance in the size of the lightning hole than the original version. For this version I've made the fitting slightly less tight to allow for this.
This is not necessary (recommended more for this design over the original), but I have 2x Sellotape "Sticky Fixers" adhered to the base so I can pull the AirPods off charge without needing to hold down the stand. Works a treat!
First major design. Designed with Onshape on my iPad. Vernier Caliper to measure dimensions precisely.
Category: Audio