1 / 2
revision of the design for the filament holder from below — zdjęcie 1
1 / 2

revision of the design for the filament holder from below

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

modification of the part together with the use of the author's solution for the possibility of transferring the filament

Ocena
5 / 5
Polubienia
14
Pobrania
64
Wydruki
2
Wyświetlenia
608
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

in the photo are previous versions of the models, I modified them a little so that the LED backlight would probably fit in its place.

Please note that the hole for the nut was 7 millimeters, although the model has 8. I think that the nut can only be melted in there.

Tagi