1 / 3
AirTag Bike Saddle Holder - Ziptie attached
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An AirTag holder that attaches to a bicycle saddle using zip ties.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The title says it all. In the holder, the AirTag has about 0.5mm of space all around. If you'd like a tight fit, you can wrap it in a tiny bit of paper or similar.
Printing should cause not problems as the parts are huge and have no overlaps etc. I printed in PLA with a 0.8mm nozzle and it took about 30 minutes.