Wig Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stand to hold wigs, hats, or other headgear. Designed to print in parts without support.
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 246
- Wydruki
- 1
- Wyświetlenia
- 1245
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Headgear display stand developed to use standard 3/8 inch threaded mounts commonly found on tripods and microphone stands.
Model features three parts and can be assembled in any configuratiom to fit needs.
- The top piece fits most wigs and headgear, and can be covered in a wig cap for grip.
- Extender bars can be stacked for additional height.
- A three legged base with screw holes for mounting and stability.
All pieces use 3D printed 3/8 inch threads. Tolerance for easy, friction free fit is modeled in.
I ended up using a small microphone stand in place of the 3d printed base for added stability for heavier head gear.
Successfully printed in PLA with 3 perimeters and 3% infill, with no supports. Though I'd recommend increasing infill to 15% on extenders and base to add strength and weight.