Ender3 Timelapse
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here it is, how to make timelapse on Ender3.
- Ocena
- 5 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 254
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Hi, here it is. Solution for ender3… Life saver :D… Nvm :D
if you want make a timelapse with your ender3 but you dont want soldering or adding a rpi and modify your 3d printer here is solition for you. Also i created only mounting for my setup wich is a triger from selfiestick buyed in Action shop… so if you have different you have to make mout by yourself :D But also here is a short tutorial:
After you installing mounting for fan and triger, you have to check the position of trigering button, for me it was x235. Then at Prusa slicer you have to add gcode in printers-own Gcode and at bottom you will found :AFTER_LAYER_CHANGE
There you have to add this lines
;AFTER_LAYER_CHANGE
;{layer_z}
G1 E-3 F2000
G1 X233 Y225 F{travel_speed*60}
G4 S0
G1 X235
G4 P200
G1 X233
G1 E2.5 F1900
And thats it, happy makeing timelapse :P
Don't forget to “Click A Like”, check out my other designs and Follow!
Print Settings
- Printer:
Ender3
- Supports:
Yes, needed
- Infill:
30 % or higher
- Filament material:
PET1
- Layer:
0.2