Holy Grail - Monty Python Spamalot
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Holy Grail from Monty Python's Spamalot ( Based on Monty Python and the Holy Grail)
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 124
- Wydruki
- 0
- Wyświetlenia
- 401
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Designed from scratch to match the original film poster as best as possible but also to print without the need for support and to be efficient with filament usage.
Made for a production of Spamalot but also a must for fans of Monty Python
There are 3 holes in the bottom that I used with magnets to accomplish the bottle dance part of “You Won't Succeed on Broadway” So all in all I had 7 printed for that plus the Hero version for the big reveal.
Their are 2 models one has flat circles to glue gems on and the other has spheres in place.
Print settings-
0.2mm Quality preset on Prusa slicer
No supports should be needed to get a successful print ( The underside of the ridges may be poor quality depending on your printer but good enough for a prop in my opinion)
Due to me having to print 8 i only did 2 walls and this meant that when dropped they stem would sometimes break (Nothing glue didn't fix) If you just want one maybe try 3 or even 4 walls for maximum strength.
Filament i used was Prusament PLA Blend Viva La Bronze
Other parts-
Gems - Any 6mm flat backed gem of your choosing
Magnets- 5mm diameter and 5mm long magnets - just super glued in.