1 / 5
Profilzylinder 30 x 30 mm / Euro Profile Cylinder Lock 30 x 30 mm — zdjęcie 1
1 / 5

Profilzylinder 30 x 30 mm / Euro Profile Cylinder Lock 30 x 30 mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Profilzylinder 30 x 30 mm / Euro profile cylinder lock 30 x 30 mm

Ocena
0 / 5
Polubienia
4
Pobrania
102
Wydruki
0
Wyświetlenia
445
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Ich hatte gerade kein altes Schloss zur Hand - also selbst gemacht und an einer Türe mit Erfolg ausprobiert. Es ist nicht für permanenten Gebrauch gedacht, deshalb auch keine Bohrung für die Befestigung.

Das Gehäuse und die Schließnase separat drucken, den Innenzylinder zusammen mit dem Marker drucken, der dann in anderer Farbe gedruckt werden kann. Supports nicht vergessen.

Die Schließnase wird beim Montieren einfach in die Nut des Innenzylinders gesteckt. Den Innenzylinder natürlich vorher in den Profilzylinder einführen.

----------------------------------------------------------------------------------------------

I just lacked an old euro profile cylinder lock - ok, made me one and tested successfully at a door. It's not intended for permanent use, therefore I didn't add the thread for the mounting screw.

Print the housing (Profilzylinder.3mf) the lock action nose (Schliessnase.3mf) separately. The inner cylinder with handle and marker should be printed together. You can chose another color for the marker. Don't forget supports.

Mounting: Insert the inner cylinder into the housing. Then stick the lock action nose into the notch of the inner cylinder.

 

3 perimeters, 25 % infill (gyroid) / organic support / .2mm layer height

 

Onshape: Suche nach / search for “Profilzylinder”

 

Tagi