1 / 1
LDO Nitehawk36 Mount for XOL Toolhead W/ Sherpa Mini including Cover and Cooling Fan — zdjęcie 1

LDO Nitehawk36 Mount for XOL Toolhead W/ Sherpa Mini including Cover and Cooling Fan

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple remix of Hartk1213's Nitehawk36 Mount and Cover to fit the XOL Toolhead by Armchair Heavy Industries

Ocena
0 / 5
Polubienia
11
Pobrania
92
Wydruki
1
Wyświetlenia
827
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

BOM:

 

  • 2510 Axial Fan
  • M2.5x16 BHCS (x4)
  • M3x30 BHCS (x2)
  • Short Length of PTFE Tube
  • Zipties

 

Notes:

 

All Parts are orientated for printing and do not require any supports

Hartk1213's original PTFE Ziptie Clip and Fan Cover are interchangeable with the Backing Plate to allow for different configurations

Using an M3 thread tap I carefully threaded the end of my PTFE tube to accept a M3x8 SHCS to lock the PTFE Clip in place and aid in the strain relief of the cable but this step is not needed

I ran Into collisions issues with my PG7 Cable Gland and the 2510 Fan in this Configuration so do be aware of that. For now I will have to run without the fan to complete my homing routine without collision until I resolve this issue

[a]* file name prefix indicates accent color