Stackable Hexagonal Organizing Trays with Lids
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three compartment hexagonal organizing tray with lids that can be stacked with the lids or nested inside each other
- Ocena
- 0 / 5
- Polubienia
- 21
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 393
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- GNU General Public License v2.0
These large organizers are designed to nest when not in use or stack with their lids for more modular storage.
Two thickness:
- 1.2mm wall thickness - good for added strength or 0.6mm nozzles - takes about 50% longer to print (good for bolts, screws, and other heavier things)
- 0.8mm wall thickness - faster printing, fine for lite things like crayons, buttons, beads, etc. Less material and time to print.
I cranked up the print speed for exterior walls as these are continuous runs with slow changing curves.
PLA is fine for most things, if you want a bit more durable try PETG.
Here you can see the model such that they stack on top of each other if you want to put a stack on a shelf.
If you are looking for smaller trays, check out the ones in my gaming accessories EcoDad's Gaming Accessories Collection by EcoDad.