Umweltplakette/Environment Sticker Holder (GER)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Umweltplakette/environment sticker holder for the German cities. Allows you to easily remove sticker when not needed.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 146
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I drive into Germany from time to time and need an environment sticker to go into the cities. Since most of my time I drive in The Netherlands I don't need the sticker to always be on my windshield. I created this little holder that fits a 8cm plexiglas circle to which I stuck the Umweltplakette. I attached some small suction cups (Amazon DE Link, Amazon NL Link) so I can stick it to the windshield when I am in Germany and take it off again when I leave the country. This is also handy if you live in Germany and get a new car, or when your windshield breaks as it's transferable between cars.
The holder is designed to hold an 8cm piece of plexiglas snugly (1-1.5mm thick) so that no additional clamp is required to hold it down. However, if it is not as snuck as you'd like I have cut out 2 slots in which you can glue some bendable metal pins that one can find in the super standard a4 folders (see picture).
I printed it in PETG and highly recommend you do the same (or ASA/ABS) due to print being in the car in the sun.