Gaggiuino Front Angled Screen - NextMonday
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Taking the angled screen design for the Nextion screen and making it work with the NextMonday screen.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 72
- Wydruki
- 1
- Wyświetlenia
- 920
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This mount will work with the screen housing designed by Loogle. Screen cables feed into the back of the mount and through one of the lamp fittings which needs to be removed (these are hidden by the mount so no longer needed.
I have made holes in the bottom of the mouunt to fit 10mmx2mm magnets for extra stability if desired, these should be held in place with CA glue.
Thanks to the original designer(s) of the angled screen mount and Loogle for the screen enclosure for this one.
There are now two variants of this model - one for a 5 degree angle and the other for 15 degrees.
Enjoy!