Chinese to VIC-AUS Number Plate Adapters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ideal for mounting Victorian Plates onto a chinses made vehicle.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 55
- Wydruki
- 1
- Wyświetlenia
- 400
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
Working at a dealership we had a issue with mounting Victorian number plates onto the Chinese made vehicles. There are universal adapters on the market but they either mount too high or too low, and in some cases rattle (Not ideal on a brand new car). In some cases you can make a new hole in the car or the number plate but there is a risk of being off centre or crooked.
Taking inspiration from another Ballarat Hackerspace member I designed these simple adapters.
Recommendations for Printing:
- Print using ASA for UV Resistance and Long jeopardy (You can Print In PETG but it will break down on hot/high UV days).
- slice with 6 perimeters and 5 base/top layers (This is to limit damage during install and to allow the smaller screws to cut their own threads).
-20% Infill on Gyroid pattern.
There are 2 spacers included standard for vehicles with a top and bottom screw and a small for cars that only have the top screws.
During install make sure arrows point towards each other.