Qidi Q1 Pro LED light halo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a bright idea to print and install...
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 406
- Wydruki
- 8
- Wyświetlenia
- 2760
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Say hello to the brightest LED upgrade for your Q1. Pick up some 8mm wide 24v LED strip LED's (for example) , print the parts, install and 2 wires later, you are blinded. I printed in PC-ABS blend to handle the constant chamber heat. There is very minimal interference in the front corner where the head homes, but only when it actually homes. I don't think there will be long term implications with this.
The wiring is simple, just unhook the stock wires from the connector, replace with the new ones. This likely will require some soldering/wiring on the LED strip itself. You will need 1 meter of LEDs to do this.
Prints are in the correct orientation. the corners will need tree supports.