ToolChanger Back Pack 5 Exhaust Port with Zip Tie Guides
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
5 tool exhaust port with mounting slots to use large zip ties as cable guides.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 166
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
I am using EddieSha's toolchanger backpack in my Sovoron build. I wanted to use large zip ties as cable guides and I needed a way to anchor the ends. The zip ties I used are these: https://www.homedepot.com/p/Commercial-Electric-36in-Heavy-Duty-175lb-Tensile-Strength-UL-21S-Rated-Cable-Zip-Ties-15-Pack-Natural-White-GT-920HD-15/315460455
I also added an anchor slot to the board mount/strain relief at the tool head. That model is here: https://www.printables.com/model/998895-ebb36-mount-with-pug-support-for-zip-tie-guides
There are small pilot holes where you can use tiny laptop screws to hold the zip tie in place if you want - be careful not to make the screw too long or it might pierce the cable!
I realized while looking at EddieSha's original design, that I am using his exhaust port upside down. It's working for me in my application, just wanted to let everyone know I'm aware of it.