Mini milk crate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Miniature version of the folding milk box from ONF's FUSE 1st Official V Membership Kit
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Standard Digital File License
I made this to give away as freebies for ONF's SPOTLIGHT in North America tour! It's about 20% scale of the original milk box but can be scaled in the slicer as you like (scaling down might not work but scaling up should be fine)
You will need to print 1 of each of the files provided. Preferably in the intended colours lol
For assembly, you just have to snap together the side pieces into the base with the bottom surfaces facing the inside. Then snap on the white piece to lock it together, which can be a little tricky. Hopefully I finally got the tolerances right and it all works without needing to file anything, but of course it also depends on your printer. If the pieces don't fit right off the printer, use a file or scissors to thin the connection on the wall pieces or use a blade to carve the slot on the base a tiny bit wider.