Bigtreetech Eddy probe on Qidi X-MAX3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter mounts a Bigtreetech Eddy bed level sensor in place of the previous inductive or BLTouch probe.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 91
- Wydruki
- 2
- Wyświetlenia
- 1145
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I stopped using this mount and moved the probe into the back print head cover: https://www.printables.com/model/1317184-qidi-x-max-3-magnetic-printhead-backcover-for-btt
The Bigtreetech Eddy probe upgrades the original inductive or BLTouch probe. For mounting two M3 threaded inserts are and potentially small washers for z-height adjustment are needed.
For mounting, keep in mind that BTT recommends to mount the probe backwards at a z-offset of 2.5±0.5mm over the nozzle height. See https://github.com/bigtreetech/Eddy for details.
Configuration works as documented by BTT, remember to remove the old probe from printer.cfg
⚠ WARNING: This will not work with Qidi's original firmware, the eddy sensor needs a current 0.12 Klipper or BTT's fork of Klipper!
Version 2:
I had to move the sensor slightly more to the right to accommodate for the wider fan duct.
⚠ WARNING: Version 2 removes 21mm from X-Axis range, the new x_max is 304mm. Set that limit in
printer.cfgor it will crash and will cause layer shift.Additionally, set the new limit in the slicer, otherwise the print will abort at one point with an “Move outside of range” error.