Vixen Sphinx SX to Omegon Tripod Adaptor Flange
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now you can mount your nice Vixen Sphinx SX (maybe other models) GoTo mount on your sturdy Omegon Tripod
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Physics & Astronomy
- Licencja
- Creative Commons — Attribution — Noncommercial
Lets face it, adaptors for telescope mounts and tripods are expensive. I created the first version of this in PLA over 8 years ago and it served me well. I decided to replace the first version with this new 2.1 version for a couple of reasons:
1) Functionality - The first version was printed in one piece and had layer line weaknesses and I had to be careful to not use to much pressure when adjusting the Azimuth while polar aligning. The new v2.1 has two pieces printed with an orientation to use the strength of the layer lines.
2) Aesthetics - I printed it in blue PETG to match the color scheme of my Vixen Sphinx SX and also add some additional durability with the PETG (though the PLA I used before was just fine, the old adaptor showed no signs of wear or compression.) Just FYI, I used Hatchbox Blue PETG and it matches the Vixen Sphinx blue pretty well.
So, now you can mount your nice Vixen Sphinx SX (maybe other models) GoTo mount on your sturdy Omegon Tripod too. I have included the STEP files so you can customize to your exact needs,
Printing Tips:
- As PETG is a better choice for strength, durability and heat resistance, I strongly recommend using it for your filament choice. PLA can be used but might suffer deformation from being stored or used in high heat environments.
- Print the base upside down for least support material.
Filament - PETG
Infill - 20-30% for is fine
Layer Height - .25-.30mm
Supports - Print the Base upside down and make use to use supports (PETG is very susceptible to stringing) under the square mortis slot. Make sure to remove all debris in the mortis after printing as that will insure a good fit with your rings.
Parimeters - 5-7
Additional Parts - 2x M4x15mm Bolts, 2x M4 nuts
Bed Adhesion - Use glue stick to protect your bed from the PETG
Rafts - None
Scaling - This model should not be scaled as this is specifically designed for the Vixen mount and Omegon tripod
Filament Change - None necessary
Post Printing Notes:
This is a pretty quick and easy print. Just make sure you use the correct settings for PETG in your slicer.
Happy Printing!
You can help
To help cover the expenses of printing prototypes for the models I share, please consider a donation by purchasing an item from my Amazon wishlist here
Please leave a comment if you print this model and let me know how you like it.
Here are my other similar models related to Astronomy
printables search – Astronomy @HandyHandcrafts
And other types of models here:
https://www.printables.com/@HandyHandcrafts/models
Award winning Model “Japanese Toolbox” for the "Box Contest: here:
https://www.printables.com/model/260100-japanese-toolbox-inspired-locking-lid-box
