infil speed test and top chell layer test for bambu studio and orca slicer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
test at what speed your infill works looks / works best and see how many top chell layers you should be using
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 170
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
how to use:
top chell layer test : the best looking value is the one that u should use
infill speed test: check the bottom of the print look for things like cooling problems cracks in the infill walls or underextrusion. if any of these are seen use a lower value
warning it may not print at full speed from to low acceleration. slower printers may not even be fast enough
( this test is limited to your printers capabilities)
to make sure your printer is running the infill at the fastest speed that your printer can achieve you can change this setting:
this test is made for bambu studio and orca slicer